How to Choose a CDL Training School near Greensboro Alabama
Best wishes on your decision to become a truck driver and enroll in a CDL school near Greensboro AL. Perhaps it has always been your goal to hit the open road while operating a big ole tractor trailer. Or possibly you have done some analysis and have found that a career as a truck driver provides excellent income and flexible job prospects. No matter what your reason is, it’s essential to get the proper training by picking the right CDL school in your area. When assessing your options, there are a number of factors that you’ll need to consider prior to making your ultimate selection. Location will certainly be an issue, especially if you need to commute from your Greensboro residence. The cost will also be important, but picking a school based exclusively on price is not the optimal way to ensure you’ll receive the proper education. Don’t forget, your objective is to learn the knowledge and skills that will allow you to pass the CDL examinations and become a qualified truck driver. So keeping that target in mind, just how do you pick a truck driving school? The answer to that question is what we are going to cover in the rest of this article. But first, we are going to review a little bit about which CDL license you will ultimately need.
Which CDL Will You Require?
To operate commercial vehicles lawfully in Alabama and within the USA, a driver needs to get a CDL (Commercial Driver’s License). The three classes of licenses that one can apply for are Class A, Class B and Class C. Given that the subject of this article is how to choose a truck driver school near Greensboro AL, we will highlight Class A and B licenses. What differentiates each class of CDL is the type of vehicle that the driver can operate in addition to the GVWR (Gross Vehicle Weight Rating) or GCWR (Gross Combination Weight Rating). Following are short explanations for the two classes.
Class A CDL. A Class A Commercial Drivers License is needed to drive any vehicle that has a GCWR of more than 26,000 lbs., including a towed vehicle of more than 10,000 lbs. Some of the vehicles that drivers may be able to operate with Class A licenses are:
- Interstate or Intrastate Tractor Trailers
- Trucks with Double or Triple Trailers
- Tanker Trucks
- Livestock Carriers
- Class B and Class C Vehicles
Class B CDL. A Class B CDL is needed to operate single vehicles having a GVWR of more than 26,000 lbs., or a GCWR of more than 26,000 lbs. including a towed vehicle weighing up to 10,000 lbs. Several of the vehicles that operators may be qualified to drive with Class B licenses are:
- Tractor Trailers
- Dump Trucks
- Cement Mixers
- Large Buses
- Class C Vehicles
Both Class A and Class B CDLs may also require endorsements to drive specific types of vehicles, such as passenger or school buses. And a Class A license holder, with the proper needed endorsements, may operate any vehicle that a Class B licensee is authorized to operate.
How to Research a Truck Driver School
When you have decided which CDL you would like to obtain, you can start the undertaking of assessing the Greensboro AL truck driver schools that you are considering. As already discussed, cost and location will certainly be your initial concerns. But it can’t be emphasized enough that they should not be your sole considerations. Other factors, for example the experience of the instructors or the reputations of the schools are equally if not more important. So following are a few more things that you should research while conducting your due diligence prior to selecting, and especially paying for, your truck driving training.
Are the Schools Certified or Accredited ? Not many Greensboro AL truck driver schools are accredited due to the rigorous process and cost to the schools. However, certification is more common and is provided by the Professional Truck Driver Institute (PTDI). A school is not obligated to become certified, but there are a number of advantages. Prospective students recognize that the training will be of the highest caliber, and that they will be given an ample amount of driving time. For example, PTDI calls for 44 hours of real driving time, not ride-alongs or simulations. So if a school’s course is certified (the course, not the school is certified), students know that the curriculum and training will measure up to the very high benchmarks set by PTDI.
How Long in Business? One indicator to help evaluate the quality of a truck driving school is how long it has been in business. A negatively reviewed or a fly by night school usually will not be in business very long, so longevity is a plus. On the other hand, even the best of Greensboro AL schools had to begin from their first day of training, so consider it as one of multiple qualifiers. You can also find out what the school’s track record is regarding successful licensing and employment of its graduating students. If a school won’t provide those numbers, search elsewhere. The schools should additionally maintain relationships with local and national trucking firms. Having a large number of contacts not only affirms a quality reputation within the profession, but also bolsters their job placement program for students. It also wouldn’t be a bad idea to check with the Alabama licensing department to verify that the CDL trucking schools you are researching are in compliance.
How Effective is the Training? As a minimum requirement, the schools must be licensed in Alabama and hire instructors that are experienced and trained. We will cover more about the instructors in the next section. In addition, the student to instructor ratio should not be greater than 4 to 1. If it’s any greater, then students will not be getting the individual instruction they will need. This is particularly true regarding the one-on-one instruction for behind the wheel training. And look out for any school that insists it can train you to be a truck driver in a relatively short period of time. Learning to be a truck driver and to drive a tractor trailer professionally requires time. The majority of Greensboro AL schools provide training courses that range from 3 weeks to as long as 2 months, depending on the license class or type of vehicle.
How Good are the Trainers? As previously mentioned, it’s essential that the instructors are qualified to teach driving techniques and experienced as both instructors and drivers. Even though several states have minimum driving time prerequisites to be certified as a teacher, the more successful driving experience an instructor has the better. It’s also important that the instructors keep up to date with industry advancements or any new laws or changes in regulations. Assessing teachers might be a little more intuitive than other standards, and possibly the ideal approach is to check out the Greensboro AL school and speak with the teachers in person. You can also talk to a few of the students going through the training and ask if they are happy with the quality of instruction and the teacher’s qualification to train them.
Enough Driving Time? Above all else, a good truck driver school will provide sufficient driving time to its students. Besides, isn’t that what it’s all about? Driving time is the actual time spent behind the wheel operating a truck. While the use of ride-a-longs with other students and simulators are essential training methods, they are no alternative for actual driving. The more instruction that a student receives behind the wheel, the better driver he or she will be. Although driving time can vary between schools, a good benchmark is 32 hours at a minimum. If the school is PTDI certified, it will provide at least 44 hours of driving time. Check with the Greensboro AL schools you are researching and ask how much driving time they furnish.
Are they Captive or Independent ? You can obtain discounted or even free training from a number of Greensboro AL truck driver schools if you enter into an agreement to drive for a specific carrier for a defined time period. This is what’s known as contract training, and the schools that offer it are called captives. So instead of having affiliations with a wide range of trucking lines that they can refer their students to, captives only refer to one company. The tradeoff is receiving less expensive or even free training by giving up the flexibility to initially work wherever you choose. Naturally contract training has the potential to limit your income opportunities when starting out. But for many it may be the only way to receive affordable training. Just remember to find out if the schools you are looking at are captive or independent so that you can make an informed decision.
Offer Onsite CDL Testing? There are a number of states that will allow third party CDL testing onsite of trucking schools for its grads. If onsite testing is allowed in Alabama, find out if the Greensboro AL schools you are looking at are DMV certified to provide it. One benefit is that it is more convenient than contending with graduates of other schools for test times at Alabama testing facilities. It is also an indicator that the DMV deems the approved schools to be of a higher quality.
Are the Class Times Flexible? As previously noted, truck driver training is just 1 to 2 months long. With such a short duration, it’s important that the Greensboro AL school you choose offers flexibility for both the curriculum and the scheduling of classes. For example, if you’re having difficulty learning a certain driving maneuver, then the instructor should be prepared to commit more time with you until you are proficient. And if you’re still holding a job while attending training, then the class scheduling needs to be flexible enough to accommodate working hours or other responsibilities.
Is Job Assistance Provided? The moment you have acquired your commercial driver’s license after graduating from trucking school, you will be keen to start your new career in Greensboro AL. Make sure that the schools you are reviewing have job placement programs. Find out what their job placement percentage is and what average salary their graduates start at. Also, find out which national and local trucking companies their graduates are referred to for employment. If a school has a lower job placement rate or not many employers recruiting their grads, it might be a clue to search elsewhere.
Is Financial Aid Given? Trucking schools are similar to colleges and other trade or technical schools when it comes to loans and other forms of financial aid being available. Ask if the schools you are evaluating have a financial aid department, or at a minimum someone who can help you understand the options and forms that must be submitted in Greensboro AL.
Why Did You Desire to Become a Truck Driver?When preparing to interview for a Trucking position, it's helpful to review questions you may be asked. Among the questions that interviewers frequently ask truck driving applicants is "What compelled you to choose trucking as a profession?". What the interviewer is hoping to uncover is not just the private reasons you may have for becoming a trucker, but also what characteristics and talents you have that make you good at your profession. You will probably be asked questions relating specifically to trucking, in addition to a certain number of general interview questions, so you need to organize several approaches about how you want to respond to them. Given that there are numerous variables that go into selecting a career, you can address this fundamental question in a multitude of ways. When readying an answer, attempt to include the reasons the profession interests you along with the strengths you possess that make you an outstanding truck driver and the ideal candidate for the job. Don't attempt to memorize a response, but jot down several concepts and topics that pertain to your own experiences and strengths. Reading through sample answers can assist you to formulate your own concepts, and provide ideas of what to include to enthuse the interviewer.
Select the Right Truck Driver School Greensboro AL
Choosing the ideal trucking school is a critical first step to beginning your new vocation as a local or long distance truck driver. The skill sets that you will learn at school will be those that forge a new career behind the wheel. There are several options offered and understanding them is vital to a new driver’s success. Most importantly, you must get the appropriate training in order to drive a big commercial vehicle in a professional and safe fashion. If you are lacking funds or financing, you may want to look into a captive school. You will pay a lower or even no tuition in exchange for driving for their contracted carrier. Or you can select an independent school and have the the freedom to drive for the trucking firm of your choosing, or one of many associated with the school. It’s your decision. But regardless of how you get your training, you will soon be joining an industry that helps America move as a professional truck driver in Greensboro AL.
A Bit About Greensboro Alabama
Greensboro is a city in Hale County, Alabama, United States. At the 2010 census the population was 2,497, down from 2,731 at the 2000 census. The city is the county seat of Hale County. It is part of the Tuscaloosa, Alabama Metropolitan Statistical Area.
Greensboro was incorporated as a town in December 1823 as "Greensborough". It was named in honor of American Revolutionary War general Nathanael Greene. The name was soon simplified to "Greensboro". The community was known as "Troy" prior to incorporation. Several sites on the National Register of Historic Places are in or near Greensboro. These include Glencairn, the Greensboro Historic District, Magnolia Grove, the McGehee-Stringfellow House, Millwood, and the Payne House.
Greensboro is slightly southeast of the center of Hale County and is crossed by Alabama State Routes 14, 25, and 69. SR 14 leads northwest 21 miles (34 km) to Eutaw and east 19 miles (31 km) to Marion. SR 25 leads northeast through Talladega National Forest 36 miles (58 km) to Brent and south 32 miles (51 km) to Thomaston. SR 69 leads north 38 miles (61 km) to Tuscaloosa and southwest 33 miles (53 km) to Linden. Demopolis is 25 miles (40 km) to the southwest via SR 69 and U.S. Route 80.
According to the U.S. Census Bureau, Greensboro has a total area of 2.4 square miles (6.2 km2), of which 0.01 square miles (0.02 km2), or 0.40%, are water.
More Cities of Interest in Alabama